demista™ heated mirror pads

Manufactured in the UK and approved to European and International norms, demista™ is available in standard sizes and alternative voltages to suit current electrical requirements. Designed with a power rating of 200W/m², demista™ Heated Mirror Pads are self regulating and run at minimal outputs.

The Pads are maintenance free and carry a 10 year warranty.

Please Note: demista™ Heated Mirror Pads can not be purchased online.

To place an order please contact the company HIB as follows:

Tel:        020 8441 0352
Fax:       020 8441 0219
e mail:    sales@hib.co.uk


FOR TRADE ENQUIRIES CONTACT R&D (demista™) LTD AT:
 
Tel:        +44 (0)1932 866600
Fax:       +44 (0)1932 866688
e mail:    sales@demista.co.uk

demista™ heated mirror pads range
     
     

Image Gallery

Frequently Asked Questions
Can demista™ be cut?
No. This will damage the insulation rendering it dangerous.
 
How much of the mirror should demista™ cover?
This depends on what area is required to be clear. The area of the mirror that will remain steam free is the area of the demista™ Pad plus approximately 20%-30% area around it.
 
Can demista™ be used with safety backed mirrors?
Yes but the backing should be earthed as should all metal parts surrounding the mirror.
 
Is a transformer required?
Only with low volt models.
 
Can more than 1 demista™ be fitted to a mirror?
Yes, within the limitations of the available power. They should then be fitted in parallel.
 
What adhesive should be used to bond the mirror to the wall?
Any solvent free.
 
Can the mirror adhesive be applied across demista™?
Yes.
 
Can demista™ be used with a dimmer switch?
This is not advisable as when turned down there would be insufficient power for demista™ to be fully effective.
 
What thickness of mirror can be used?
As glass is a good conductor of heat demista™ is suitable for use with any normal thickness of mirror.

Ordering Details

 Please Note: demista™ Heated Mirror Pads can not be purchased online.

To place a order please contact the company HIB as follows:

Tel: 020 8441 0352.
Fax: 020 8441 0219

FOR TRADE ENQUIRIES CONTACT R&D (demista™) LTD AT:
 
Tel:        +44 (0)1932 866600
Fax:       +44 (0)1932 866688
e mail:    sales@demista.co.uk

You can also contact +44 (0)1932 866 600 for alternative ordering details or information on your nearest stockist.
(Lines open Monday to Friday 8.30am - 5.30pm)

 
Alternatively please email us your enquiry:
 
 
Name :   * Address line 1 :
Email :   * Address line 2 :
Telephone : County/State :
Organisation : Postcode/Zip :
Position : Country :
 
Product(s) of interest :





 
What Application :





 
Quantity required :
How did you hear about demista :